General Features

• Each of the two spindles has one ring.
• The machine can perform both Z and S twists simultaneously, provided the line speed is constant.
• It can wind onto 3 different types of bobbins.
• It can produce in the winding types listed below.
• The machine is controlled by a PLC control panel.
• The rings can be automatically lubricated at desired intervals via the PLC screen.
• The upward and downward movement speed of the rings can be adjusted via the PLC screen.
• Rubber pressure rollers are controlled by pneumatic cylinders. When the machine starts, yarn movement is automatically initiated.
• The start time for the pressure rubbers to begin pulling the yarn can be set via the PLC screen.
• To prevent wear on a single point of the rubber pressure rollers, the yarn is moved left and right by a motor. This prevents wear on the rubber rollers.
• Meter counting is done via the stepping shaft. Yarn meter counting is not performed on each motor individually.
• When the desired meterage of twist is completed, the rings automatically return to the start position.
• In case of unintentional ring movement, the system automatically stops via switches to prevent damage.
• There is a wire-type emergency stop switch to prevent any work accidents with the pressure rollers.

Technical Specifications

For more information or to request a quote for the YMR 250 Ring Twisting Machine, contact us.